Ceiling fans are a basic necessity for the summer season. However, there are some things that need to be reminded when buying a ceiling fan.
First, it is very important to choose the correct size of the fan, according to the size of the space. From a ceiling fan blade span is 29 "to 54". The hall is connected to a ceiling fan to be measured. Here are some recommended size fan depending on the size selected the type of room:
Chamber size
Up to 75 sqm – Recommended Fan Size = 29-36 cm
76-144 sqm – Recommended Fan Size = 36-42 cm
144-225 sqm – Recommended Fan Size = 44 "
225-400 sqm – Recommended Fan Size = 50-54 cm
Mounting Systems
It is recommended that the fan in the center of the room will be installed. It also needs about seven meters above the ground and about 18 "from the walls. If you can install the fan at a height of 8 to 9 feet above the ground.
Standard Mount: This is three to five inches from a metal rod (tube that reaches the top of the fan from the ceiling). The diameter of the bar down is usually between 1 5 "to ¾".
Advanced Mount: This is used to hang the fan with a 8-9 meters above the ground, if desired. These rods are available below in about 6 to 120 cm. Issues of production adjusted for the size of the bars are determined by your needs.
Flush mounting: This anchor the fan directly to the ceiling. In general, a standard cooling fan can be used as a color, but still, "hugger" or "low profile" ceiling fans are for the purpose of disposal.
Inclined plates: This is used for the vaulted ceilings and corner.
Wet or damp Review
When installing a ceiling fan in the bathroom or other wet places, you should go for a fan, UL "wet" votes. During the installation of fans in a terrace or veranda, after a "wet" rating, as they come into contact with water.
All components of the fan set on the operation of the fan and then define the performance of the fan.
Other components
Engine: There are two types of motors, a sealed and lubricated, and the other with the oil-bearing. There is hardly need any maintenance for motors with sealed bearings, while the engines require more frequent oil with an oil bath.
The motor housing: This is the decorative part of the fan, which surrounds the fan motor. Fans with heavier materials are less likely to cause tremors. This also allows for greater stability on the part of supporters with longer rods.
Other features include ensuring longevity to that of heavy reels, accurate techniques for storage and shock absorption. These functions are typically found in expensive ceiling fans.
Blades: The angle of the blades is called a fan is bad luck. It is determined in degrees. Blades move more air passages, which is provided in cubic feet per minute. However, it is not solely responsible for air circulation. Other factors, such as the design of the engine as well as the speed, the design of the blade, and many others to the amount of air movement.
To ensure diversity in design, offering producers a wide range of styles of blade in different models. However, changing the style of the blade can have a negative impact on the performance of a fan.